Details for sauna 2
Checklist
Check door adjustment and torque hinge bolts to the recommended 7.5nm, Check felt strips on the side glass panels is not protruding, Check and tighten door handle, replace buttons if required., Check and tighten door catch, Check tablet door hinges, tighten if necessary, Check the door seal and note if replacement required, Check tablet door magnetic catch, Check USB charging port is working, Remove full spectrum heaters and clean the heaters and the glass. Replace heaters., Test the chromatherapy remote and replace batteries if required, Clean the glass windows and roof both inside and outside, Check for loose slats on the bench and heater guards. Use brad nailer to secure if loose., Check all lights and replace if required
Heater Measurements
Sauna Temp:2
Left Panel: 86
Left Bottom Panel:73
Left FS Heater:188
Right Panel: 86
Right Bottom Panel:73
Right FS Heater:188
Other notes
Comments:
Repaired 5 slats
I disconnected the extra door heater and monitored up to 36 degrees.Sauna 1 and 2 were fairly consistent but then sauna 2 seemed to get stuck in 36.I checked the temperature sensor and the mesh was blocked up with dust I vacuumed it clean and suddenly the temp weren’t up drastically.Please monitor but I suspect now sauna 2 will be faster than sauna 1 with the door heater.
Attachments: